How do we test whether our Google spend is incremental?
Our answer
Test Google with a geo holdout read on total store sales, not Google-reported conversions. Test branded search, non-brand and Performance Max separately. Use Google's Conversion Lift once you have 1,000 observed conversions and a $5,000 study budget.
- Confidence
- Medium
- Strongest proof
- 10 Google rules
- 8 datasets, 4 practitioners, 3 opinions or claims
- Sources
- 10 sources
- 25 statements
- G
New here? Take the 1-minute tour
Why this is the answer
3 reasons and our judgmentGoogle's reported return can't stand in for a test. Geo holdouts by Common Thread Collective, an ecommerce ad agency, found branded search's incremental revenue was a median 0.27 of what Google reported across 39 stores, and non-brand 0.67 across 44.
Google's own Conversion Lift lists Search and Performance Max among its supported campaigns. Google still says it isn't available to every account and tells you to contact your Google account representative to use it.
How well test regions fit their control group beforehand decides whether a geo test reads clearly. Stella, an incrementality testing software maker, found it the strongest predictor across 225 geo tests, and advises skipping a test when test regions can't produce a few hundred conversions.
Our judgment
- Read every Google test on total store sales. Google's reported return ran above measured incremental return for branded search in Common Thread Collective's tests and below it for YouTube in Haus's tests.
- Test branded search, non-brand Search and Performance Max as separate cells. Keep brand searches out of Performance Max while you do, because Common Thread Collective's brand and non-brand results differ widely and ClickTrends, a Google Ads consultancy, says Performance Max can show strong reported ROAS while mostly capturing brand searches.
- Start with the Google campaign type where the most reported revenue is at stake. This applies Common Thread Collective's rule to test where the gap between low and high incrementality estimates is widest.
- Prefer a geo holdout on your own sales over Google's user-based Conversion Lift for budget calls when both are open to you. Google's study reads conversions Google measures and models, while Stella names a read independent of Google as a reason to run your own. Use Google's study as a cheaper cross-check.
Our judgment, built from Common Thread Collective, Haus, Stella, ClickTrends and Google: our reading of these sources, not a finding from any one of them.
What the sources say
25 statements from 10 sourcesPPC Land reports Google's Conversion Lift studies do not accept click-ID-only offline imports or GA4-imported conversions, and Google recommends one to two weeks of conversion data before launch.
“GCLID-only imports are insufficient”
Google says user-based Conversion Lift does not support web conversions imported from Google Analytics or GCLID imports without hashed PII, and asks for 7 to 14 days of conversion data first.
“GCLID imports without hashed PII can't be used in Conversion Lift, because the control group is not served an ad to click on.”
Search Engine Roundtable reports Google's updated Conversion Lift help page now calls GCLID-only imports insufficient and lists GA4-imported web conversions as unsupported for user-based studies.
Search Engine Roundtable says Google's Conversion Lift page asks for 7 to 14 days of continuous conversion data and about 75 to 80% of web conversion traffic through Google tag gateway before a study.
“audit their conversion tracking setup before launching a study”
Google's geo-based Conversion Lift also goes through a Google rep, needs campaigns targeting a single country, and rates feasibility. Google advises against running a study rated low.
“We don't recommend proceeding with low feasibility status”
Google says geo-based Conversion Lift usually needs more budget than the user-based kind, and to wait for the study's end before reading results. It reports incremental ROAS with a confidence interval.
“Conversion Lift based on geography typically requires a higher budget than the user-based alternative.”
Google's Performance Max uplift experiments test adding Performance Max to your Search, Video and Display campaigns, with a 50% traffic split by default, read on Google-reported conversions.
“The traffic split is 50% by default.”
Haus says the typical brand's YouTube geo test finds 2.3x the DTC sales the ad platform credited (80% interval 1.7x to 2.9x), and about three in four tests land above the platform's number.
“None of these numbers are yours, and the only YouTube result that should move your budget is the one measured on your own data.”
In Haus YouTube geo tests, a typical 24% of lift arrived after the ads stopped, and counting that window raised typical ROI about 32%. A day after a flight, YouTube still booked about 64% of an in-flight day's lift.
“In the typical test, 24% of the lift landed in the post-treatment window.”
Haus says about half of YouTube tests are built to detect lifts under 4%, and brands that missed a benchmark on a first test beat it on the retest 44% of the time, so one test is not a verdict.
“one test is a read, not a verdict.”
Relevant Audience reports Google's Conversion Lift help page now lists Search and Performance Max, with minimums of 1,000 conversions and US$5,000. An April 2026 copy listed only Video, Discovery and Demand Gen.
“now lists Search and Performance Max as supported campaign types”
Google's user-based Conversion Lift needs a Google rep, at least 1,000 observed conversions and a $5,000 minimum budget. Google allows 7-day studies but recommends more than 14 days.
“We've found up to a 17% drop in Absolute Lift in studies with a long conversion lag that run for less than 14 days.”
Google says its free, open-source Meridian GeoX library for geo experiments on any ad platform is now generally available, and its results can feed into a mix model.
“Now, GeoX is generally available globally in Meridian, so you can get started with running independent experiments, or incorporating incrementality results into your MMM to help boost accuracy.”
Google's GeoX setup needs daily pre-test history by geo of at least three times the test length, and a year or more where seasonality is strong.
“you'll provide a minimum of 3*N days worth of response data, such as revenue or conversion counts, where N is equals to the duration of the actual test period of your experiment”
Google's GeoX guide calls for at least 10 geos for a single-cell test, ideally 50 to 100+, daily data only, and says geo tests usually cost more and run longer than user-based lift tests.
“You should include a minimum of 10 geos for a single-cell design”
CTC, which sells ad buying and measurement, says its geo holdout tests put Google branded search at a median 0.27x incremental ROAS, against 1.14x for Facebook acquisition and 0.67x for non-brand Google.
“That does not mean branded search is worthless, but it means it should not compete for budget against channels with meaningfully higher incrementality.”
Elevarus, an agency, says that above about $80K a month per channel you should run 4 to 6 week geo holdouts for incremental ROAS; below about $40K, use Meta's lift tool or skip formal testing.
“Use a geo holdout when you need to test cross-channel effects, when offline conversions are part of the outcome, or when the platform-native option doesn’t cover the campaign type.”
In a real client's YouTube geo test design (about $12.4K a month, 17 weeks), 4 control cities could detect a 21.5% lift and 10 cities 15.0%, so a true 10% lift would be missed.
“If your team would reallocate budget at a +10% lift but not at a +5% lift, the test needs to distinguish those two outcomes.”
Across 225 geo tests on its platform, Stella, which sells testing, found a median 2.31x incremental ROAS. It suggests 4 to 6 weeks for most brands and skipping tests that can't get a few hundred conversions.
“The confidence interval matters more than the point estimate”
CTC's baseline factors: Meta acquisition is worth about 120% of what 7-day click reporting shows, Google branded search about 30%. Factors range from about 30% to 230% by channel, so each brand should test its own.
ClickTrends, which sells PMax test design, suggests excluding brand from Performance Max for at least 4 weeks and comparing total account results, not PMax metrics. That is a before-and-after read, not a control.
“Incremental demand should show up in total account growth, not just reallocation of credit between campaigns.”
CTC, long critical of multi-touch attribution, now offers Northbeam to smaller brands, since at $10K to $15K a month a store likely lacks the conversions per region for geo tests.
CTC's Q1 2026 benchmark of 299 brands, using its incrementality factors, puts Google brand search at 19.1x platform ROAS but 5.7x incremental, and Meta acquisition at 1.83x reported versus 2.07x.
“Google Brand search reports 19x ROAS but delivers just 5.7x after incrementality adjustment (0.30x IF).”
CTC's data director suggests testing first the channel with the widest dollar gap between low and high incrementality estimates, since that test pays back fastest.
“We recommend prioritizing channels by the width of the expected revenue range.”
CTC, which sells measurement, says its 146 geo holdout tests across 80 stores put Google branded search at a median 0.27x incremental ROAS (39 stores) and non-brand at 0.67x (44 stores).
“Google Branded Search (median iROAS 0.27, 39 stores) confirms what the theory predicts: platforms dramatically overreport on last-click channels.”
In the full answer
For readers who sign in- What to do this week3 steps
- The numbers behind it3 figures from cited sources
- Where each source standsA chart placing each source on the question
- The strongest disagreementThe best case against the answer, from a cited source
- How sure we areWhat its confidence rests on, and what would change the answer