All answers

The Prevailing
Answers for
Business model:
Business model, pick up to two

Which customer lists should we upload to Google (Customer Match), how often should we refresh them, and what do they change in Search, Shopping and Performance Max?

The PrevailingPublished Oct 26, 2026

Our answer

Upload all customers with every identifier, plus separate lapsed, high-value and loyalty lists, and sync daily or at least weekly. Smart Bidding uses them in Search, Shopping and Performance Max to tell new customers from existing ones.

Confidence
Medium
Strongest proof
12 Google rules
7 practitioners, 4 opinions or claims
Sources
6 sources
23 statements

New here? Take the 1-minute tour

Why this is the answer

3 reasons and our judgment

Your lists tell Google who is already a customer. Google's lifecycle goals read them to tell existing customers from new ones. Google recommends Customer Match on top of website lists and its own detection, which looks back over up to 540 days of purchases.

Lists go stale unless you keep adding to them. Google asks for daily appends when uploads are automated and a weekly upload at least when done by hand. Memberships expire after 540 days, and conversion-based lists built from enhanced conversions update themselves.

Segment lists serve specific goals. Common Thread Collective (CTC) builds separate lists for lapsed buyers (91 to 365 days since the last order), the top 20% by lifetime value and loyalty members. It refreshes any list older than 90 days before using them.

Our judgment

  • Make one full customer list the base, with every identifier you hold in the same row. Google's lifecycle goals use it to tell existing from new customers, and ALM Corp says stale lists make Google call old customers new.
  • Automate the sync through Data Manager, a connector or conversion-based lists rather than uploading by hand. This follows Google's cadence and CTC's habit of refreshing old lists before using lifecycle modes.
  • Add lapsed, high-value and loyalty lists as separate lists only for the lifecycle goal that uses each. Google reads each list as one customer type and labels conversion-based lists itself, one label per list. CTC builds each segment for a specific mode and splits mixed lists.
  • Keep customers in campaigns and let lifecycle goals steer bids. Exclude a list only in a strict acquisition campaign, in line with Google's new customer acquisition goal and with not blanket-excluding customers on Meta (Excluding existing customers from prospecting). Google recommends observing a segment before excluding it and treats lists in Performance Max as suggestions, while CTC's suppression of recent buyers targets acquisition campaigns.
  • The advice holds at every monthly spend. The sources set their rules by list size, account history and campaign settings. The one spend rule, Google's $50,000 lifetime spend for Targeting, gates a setting this answer does not rely on.

Our judgment, built from Google, ALM Corp, Common Thread Collective and TechWyse: our reading of these sources, not a finding from any one of them.

What the sources say

23 statements from 6 sources
  • GoogleOct 26, 2026Supports

    Google's lifecycle goals setup says new-customer bidding options use an existing customers list with Google autodetection, while high-value and lapsed customer goals each need their own matching customer list.

    “Google autodetection is automatically activated when you optimize your campaign to bid higher for new customers or bid only for new customers”

    Read it on support.google.com

  • GoogleOct 26, 2026Supports

    Google says most advertisers' Customer Match rates are between 29% and 62%, and advises uploading every data type per customer and refreshing lists weekly by hand or daily by API.

    “Most advertisers' match rates are between 29% and 62%.”

    Read it on support.google.com

  • GoogleOct 26, 2026Supports

    Google says Smart Bidding campaigns automatically use all Customer Match lists, manual bidding ignores them, and memberships expire after 540 days unless at least 100 members are added or updated.

    “Customer Match memberships expire after 540 days. To keep a list eligible, ensure at least 100 members are added or updated within that window.”

    Read it on support.google.com

  • GoogleOct 26, 2026Supports

    Google's Customer Match guide says untargeted lists are auto-included in Smart Bidding and optimized targeting, with an opt-out. Lists last at most 540 days and need 100 members added or updated.

    “Customer Match lists have a maximum membership duration of 540 days.”

    Read it on support.google.com

  • GoogleOct 26, 2026Supports

    Google says conversion-based customer lists are built automatically from enhanced conversions data for tag-based setups, and Customer Match lists are automatically used in Smart Bidding.

    “Customer Match lists are automatically used in Smart bidding.”

    Read it on support.google.com

  • GoogleOct 26, 2026Supports

    Google says compliant advertisers can use Customer Match for Observation and Exclusions. Using it for Targeting requires 90 days of Google Ads history and more than USD $50,000 total lifetime spend.

    “If you have 90 days of Google Ads history and more than USD $50,000 total lifetime spend”

    Read it on support.google.com

  • GoogleOct 26, 2026Supports

    Google says audience signals in Performance Max are optional suggestions, and the campaign may reach people outside them if they are likely to convert. Customer lists are one signal to try.

    “Performance Max may show ads to relevant audiences outside of your signals if they have a strong likelihood of converting”

    Read it on support.google.com

  • GoogleOct 26, 2026Supports

    Google says audience segments can be excluded from Performance Max and other campaign types once a campaign exists, though exclusions may not apply to people who opted out of ads personalization.

    “Audience exclusions may not apply to users who have opted out of ads personalization.”

    Read it on support.google.com

  • GoogleOct 26, 2026Caveat

    Google says applying Customer Match lists lifted conversions 5.3%, from its own 2021 to 2022 data, and cites ImmoScout24 seeing a 52% higher conversion rate and 15% lower cost per acquisition.

    “when advertisers applied Customer Match list signals to campaigns, this resulted in a 5.3% conversion uplift”

    Read it on support.google.com

  • GoogleOct 26, 2026Caveat

    Google says Customer Match files can include user IP address, passed unhashed, and an interaction timestamp. IP matching is not supported for users in the EEA, UK or Switzerland, and a timestamp needs an IP.

    “Timestamps can’t be sent without an accompanying IP address.”

    Read it on support.google.com

  • PPC LandOct 25, 2026Supports

    Google said on October 22, 2026 that High Value Mode for Shopping and customer retention goals for Performance Max, Search and Shopping roll out that month; its help page did not match yet on October 25.

    “Customer Retention Goals are rolling out this month for Performance Max, Search and Shopping campaigns”

    Read it on ppc.land

  • GoogleOct 24, 2026Supports

    Google says lifecycle goal settings can't be incrementality tested inside Google Ads, but its geo or user Conversion Lift can check whether ads bring incremental new customers.

    “In some instances, your "New customers only" ads might be shown to returning customers as well due to privacy and technical reasons.”

    Read it on support.google.com

  • GoogleOct 24, 2026Caveat

    Google says customer lists need at least 100 active members in at least one network to be used in lifecycle goals, which let you bid differently for new and existing customers.

    “Customer lists must have at least 100 active members in at least one network to be used in lifecycle goals.”

    Read it on support.google.com

  • Common Thread CollectiveOct 22, 2026Supports

    Common Thread Collective says to upload customers who bought 91 to 365 days ago and have not returned to Customer Match, then enable Re-engagement Mode in one Search or PMax campaign.

    “Pull your customer list for everyone who purchased between 91 and 365 days ago and has not returned.”

    Read it on commonthreadco.com

  • PPC LandOct 22, 2026Caveat

    PPC Land reports Google's new customer value adjustment, which inflates the conversion value Target ROAS bids on. Google's interface asks for segments of 1,000 active members; its help page says 100.

    “Both flat and percentage adjustments inflate the conversion value that appears in Google Ads columns.”

    Read it on ppc.land

  • PPC LandOct 18, 2026Caveat

    PPC Land quotes Google's email that from November 16, 2026 Google Ads Data Manager will no longer require SHA-256 hashed customer data and will support encrypted data by default.

    “Starting on November 16, 2026, we will no longer require hashed customer data (SHA-256) for Google Ads Data Manager”

    Read it on ppc.land

  • Relevant AudienceSep 27, 2026Caveat

    Relevant Audience, a Thai agency that sells Google Ads management, says Google's Customer Match page now lists IP address and timestamp columns. It says to check consent wording with counsel before adding an IP column.

    “The page does not say how IP rows affect match rates or list sizes”

    Read it on relevantaudience.com

  • PPC LandSep 26, 2026Caveat

    PPC Land reports Google Ads now accepts unhashed customer IP addresses with timestamps in Customer Match uploads, even lists built from IPs alone. It bars matching for people in the EEA, UK and Switzerland.

    “permits lists built from IP addresses alone”

    Read it on ppc.land

  • Common Thread CollectiveAug 27, 2026Supports

    Common Thread Collective says Google's lifecycle goals need a Customer Match list with at least 100 active members per segment, and loyalty goals need a separate loyalty member audience.

    “A Customer Match-eligible audience list with at least 100 active members for each segment you want to use”

    Read it on commonthreadco.com

  • Common Thread CollectiveAug 4, 2026Disagrees

    CTC, which sells Google ad buying, says Google's Data Manager API now lets you clear a whole list at once, useful for suppression lists, and most new Customer Match integrations must use it since April 1, 2026. No data.

    “As of April 1, 2026, most new Customer Match integrations are now required to use the Data Manager API.”

    Read it on commonthreadco.com

  • Common Thread CollectiveAug 2, 2026Supports

    Common Thread Collective says Google began auto-labeling customer lists as new or existing from August 18, 2026, feeding Smart Bidding. It advises classifying every list by hand and splitting mixed lists.

    “Manually classify every eligible list”

    Read it on commonthreadco.com

  • TechWyseJun 18, 2026Supports

    TechWyse, an agency, says from August 2026 Google auto-assigns customer types to conversion-based customer lists, so review them first: a lead list may not mean existing customers.

    “A “purchase” list may clearly represent existing customers for an ecommerce retailer. A “lead form submit” list may not.”

    Read it on techwyse.com

  • ALM CorpMay 28, 2026Supports

    ALM Corp, an agency, says Google treats a customer as new after 540 days without a purchase, so upload a Customer Match list and refresh it periodically. The 1,000-user figure is ALM's. No data.

    “Re-upload every so often.”

    Read it on almcorp.com

In the full answer

For readers who sign in
  • What to do this week3 steps
  • The numbers behind it3 figures from cited sources
  • Where each source standsA chart placing each source on the question
  • The strongest disagreementThe best case against the answer, from a cited source
  • How sure we areWhat its confidence rests on, and what would change the answer

Read next

More in Bidding and optimization